Histology Reagents
Electron Microscopy Sciences PolyShield Paraffin Repellant/Remover 120 ML
PolyShield is a liquid paraffin repellent used as a protective coating on laboratory surfaces that are exposed to paraffin residue. PolyShield can also be used to clean paraffin that has adhered to lab countertops and equipment. Comes in a 120ml spray bottle.
Apexbio Technology LLC AMI5/Eosin Y disodium salt 17372-87-1 100mg
AMI5 Eosin Y disodium salt (CAS 17372-87-1) is a small-molecule inhibitor targeting protein methyltransferases including PRMTs and lysine methyltransferases such as Set7 and DOT1L It is designed to competitively bind at the S-adenosylmethionine (SAM) binding site reducing enzymatic methylation activity and influencing gene transcription events AMI5 Eosin Y disodium salt exerts its biological activity primarily through inhibition of protein methyltransferases It inhibits both arginine methyltransferases (including PRMT1 and Hmt1p at low micromolar IC50 values) and lysine-directed enzyme Set7 affecting cellular histone methylation states Based on these pharmacological properties AMI5 Eosin Y disodium salt holds research potential in studying epigenetic roles in transcription regulation and cellular signaling pathways as well as being used experimentally in histological staining
Visikol Inc VISIKOL HISTO TISSUE CLEARING
Visikol HISTO tissue clearing approach you are now able to rapidly and easily image tissues in 3D without damaging the underlying cellular morphology. The Visikol HISTO approach has been designed to pair with immunolabeling and is reversible so that 3D histology can be followed up with traditional 2D histology. The Visikol HISTO tissue clearing approach for 3D tissue cultures only requires the use of Visikol HISTO-M to render tissues transparent. Visikol HISTO-M has a refractive index of 1.50 and approx. 15 mL is required for a whole 96-well plate of micro-tissues. If you want to test out Visikol HISTO-M before you buy it or have any questions email us at
Abcam Thioflavin T, Fluorescent cell-permeable amyloid binding benzothiazole salt, 500MG
MW 318.9 Da, Purity >97%. Fluorescent cell-permeable amyloid binding benzothiazole salt. Dye used to visualise stacked β sheets in vitro and in vivo. Binding induces a shift in excitation maximum (385 nm to 450 nm) and emission maximum (445 nm to 482 nm). Highly soluble in water. Limited ability to cross the blood-brain barrier.
The product is subject to the following: Abcam Restricted Use Statement
Electron Microscopy Sciences Amphibian Ringer Solution 500 ML
Amphibian Ringer Solution is made up of salts including sodium chloride, potassium chloride, and calcium chloride hexahydrate.
Electron Microscopy Sciences Bismuth Stain Kit 3
Bismuth specifically stains Golgi beads and interchromatin granules after fixation with glutaraldehyde, whereas it stains nucleoli, basic protein, and biogenic amines after formaldehyde fixation. Bismuth staining of sections is relatively nonspecific: it can stain glycogen, lysosomes, ribosomes, polysaccharides, ferritin, and DNA. M.A. Hayat, "Basic Techniques for TEM" p. 184 (1986). Staining of Mucosubstances & Polysaccharides (Ainsworth et al., 1972). Kit contains: 10x10 ml Solution A (Periodic acid, Ethanol, Sodium acetate) 10x10 ml Solution B (Sodium tartrate, NaOH, Bismuth subnitrate).
Electron Microscopy Sciences (BGE), n-Butyl Glycidyl Ether, (Araldite RD-1) 100 ML
(Butoxymethyl oxirane)
CAS #2426-08-6 C₇H₁₄O₂ F.W. 130.19
Boiling point: 166-168°C
Electron Microscopy Sciences Potassium Dichromate Aqueous, 5% 500 ML
For your convenience in a concentration of 5.0% aqueous.
Electron Microscopy Sciences Formalde-Fresh Low Odor Solution, Histology Grade 4 LT
A specially formulated odor-mask which neutralizes the formalin odor without affecting subsequent tissue processing, handling, or staining. Low odor, ready-to-use 10% formalin solution. May be used as a fixative or preservative of specimens. Its shelf life is 24 months.
Grade: Histology Grade
Electron Microscopy Sciences Formaldehyde, Reagent, A.C.S. (Formalin), 50-00-0, 450ml
Molecular Formula CH2O, Molecular Weight 30.026, ACS Grade
Ted Pella Inc Osmium Tetroxide, 4% aqueous, 10 x 2ml
Solid vaporizes by sublimation. Should be used only under the hood. Affects eyes. Use eye protection. EM Grade, glass ampoules in black paper. No sticky labels. Osmium purity >99.95%. Light sensitive.
Leica Biosystems BOND DEWAX SOLUTION
BOND ancillaries have been designed for Leica Biosystems fully-automated BOND systems: BOND-MAX and BOND-III systems. Used in the development and validation of BOND ready-to-use primary antibodies and ISH probes - choose Leica Biosystems reagents for the assurance of a quality result in your laboratory. BOND Dewax Solution is a deparaffinization solution specifically designed for use on the automated BOND system. BOND Dewax Solution is much less harmful than alternative deparaffinization solutions such as xylene. It is provided ready-to-use in 1 L bottles and can be poured directly into the appropriate bulk reagent container on the instrument. The use of BOND Dewax Solution allows paraffin wax to be removed from tissue sections before rehydration and staining on BOND. It is specially formulated to be compatible with the automated BOND system, and efficiently removes wax from slides while retaining the integrity of tissue antigens and probe binding sites. For in vitro diagnostic use.
Across International SuperVac 5.6 cfm Corrosion-Resist 2-Stage Pump
Ai SuperVac-5C 5.6 cfm commercial grade vacuum pump now come standard with UL certified, this certification is required by many municipalities, and it also provides a higher standard of equipment safety and lifespan. These pumps are also corrosion resistant and 115V/230V 50/60Hz switchable, backed by our 2-year warranty.